Built-ins, columns, wine, drawers, ice
Line answered 24/7

Beverly HillsSub-Zero Specialists
Call (310) 706-2347
Menu

Other brands · Thermador

Thermador Columns, Seen by a Sub-Zero Shop

Some Westside kitchens hide a pair of Thermador columns behind walnut panels; others hide Sub-Zero columns; a few mix both, a fridge tower from one maker beside a wine tower from the other. Beverly Hills Sub-Zero Specialists lives mostly inside Sub-Zero refrigeration, and Thermador sits on our list of second brands, so here is how a Thermador call works with us.

4.8 / 5 · 187 ratings About these reviews

Direct reply 1/3

Who handles Thermador refrigerator repair in Beverly Hills?

Beverly Hills Sub-Zero Specialists, an independent refrigeration shop centered on Sub-Zero, also accepts Thermador jobs throughout Beverly Hills plus our wider Westside patch. Give us the appliance type, its model off the data label and what it is doing; our dispatcher says yes or no right there, and a yes turns into a $89 visit.

Thermador and Sub-Zero columns from the service side

Nobody needs a brand debate here; our blog's Sub-Zero versus Thermador piece covers buying. What matters for repair is what a technician meets once the panel swings open.

Thermador column

  • Built flush into cabinetry, usually panel-ready, often installed as a refrigerator tower, freezer tower and wine tower standing side by side.
  • Each tower runs its own compressor and controls, so one can quit while its neighbors carry on.
  • Thermador designs its own boards, sensors, hinges and ice hardware, meaning the part numbers bear no relation to Sub-Zero's.
  • Its data label, inside the cabinet, is what identifies the exact column and therefore the right parts.

Sub-Zero column

  • Same idea of a tower hidden in millwork; fridge, freezer and wine versions get paired however the designer likes.
  • Also one sealed system per tower; separately, Sub-Zero built-ins use dual refrigeration, a second system inside one cabinet.
  • Sub-Zero parts and diagnostics follow Sub-Zero's own engineering, which is the territory our technicians work in daily.
  • Model and serial sit on a label within the cabinet, mirroring Thermador.

Our readAt the level of physics, a column is a column: heat leaves through a condenser, cold air circulates past an evaporator, a gasket keeps the box sealed, and a heavy custom panel stresses the hinges. Parts, menus and fault logic differ by maker, which is why we ask for the brand and model before anyone drives over.

Direct reply 2/3

Why is my Thermador column refrigerator not cooling?

Most often airflow: a condenser furred over, a motionless fan, or frost smothering the evaporator after a defrost fault. Should the door hang slightly crooked beneath its panel, warm room air sneaks in too. Compressor or refrigerant problems are rarer. Confirm the vents breathe freely and the door shuts snugly, then book a diagnosis.

Signs a column of either brand is in trouble

Thermador towers and Sub-Zero towers share these. Treat each right-hand entry as a hunch worth testing, nothing firmer.

  1. Milk and greens feel tepid while the freezer tower stays solid

    Likely That tower's own system: a fan, a defrost fault, a sensor or its gasket

    Repair page
  2. Freezer tower lets ice cream soften and frost cakes the packages

    Likely Defrost heater or timer trouble, a worn seal, or a stalled evaporator fan

    Repair page
  3. Wine tower reads warmer than set and the glass mists over

    Likely Condenser airflow, humidity control, or a gasket gone slack

    Repair page
  4. Ice output dwindles, cubes look thin, cloudy or misshapen

    Likely A tired water filter, a pinched supply tube, or a lazy inlet valve

    Repair page
  5. Door drifts open or sags under its wood panel

    Likely Hinge wear or adjustment, which in turn spoils the seal

  6. Machinery hums nonstop, or keeps cycling in short bursts

    Likely Lint on the condenser, a weak start relay, or a control fault

Thermador cooking and the gas rule

Same terms as for a Sub-Zero call

Swapping logos leaves the deal untouched. Each house call costs $89, whether we examine one tower or three, and that sum gets folded into any fix you sign off on. Diagnosis comes first, a quote second, wrenches third, and only with your consent. More on our pricing page.

Visit fee
$89
One $89 fee covers the trip itself, be it a lone ice maker or the full Sub-Zero lineup under your roof; approve the fix and those $89 are deducted from its invoice.
Cost of the fix
Set after testing
You hear the repair figure standing beside the unit, after testing pins down what failed, and no part gets ordered before you give the word.
Phone line
24/7
The phone line is open around the clock, seven days a week.
House calls
8–6
Technicians head out at 8 AM, and the last visit of the day is no later than 6 PM, every day of the week.
Self-scheduling
Day or night
Choose a time slot on your own; the scheduler pops up on top of what you are reading.

Finding Thermador help nearby

Direct reply 3/3

Is there Thermador appliance repair near me on the Westside?

Yes, provided home is somewhere among our twelve: Culver City, Santa Monica, the Palisades, Brentwood, Westwood, Bel Air, Holmby Hills, Century City, Beverly Hills itself, West Hollywood, Hancock Park or neighboring parts of Los Angeles. Our phone line never closes. Name the Thermador appliance and we confirm it before scheduling.

What Thermador owners ask us

Thermador fridge column on the left, Sub-Zero wine column on the right: one trip for both?
Absolutely, after the Thermador column is confirmed during your call. List both when booking; that one $89 trip charge stretches across them, and every fix is quoted individually post-diagnosis.
Do you work on Thermador ranges and dishwashers too, or only the refrigeration?
Refrigeration is our home ground. Describe a Thermador range, rangetop, oven or dishwasher when calling, and we answer candidly; turning a job down beats dispatching someone unprepared.
Where on a Thermador column does the model label hide?
Inside the cabinet, usually up toward the compartment ceiling or on a side wall near it, visible once you swing the door wide; your owner's booklet pinpoints it. Reading those characters to us at booking lets our technician plan ahead.
My Thermador freezer column is beeping. Should I unplug it?
First check whether the door was left ajar or a drawer is catching; most alarms are temperature or door warnings. Closing the door properly often silences it. Should it resume with the door firmly shut, keep the column powered, relocate perishables to a cooler with ice packs, then ring us.
Should I defrost a Thermador column myself before you come?
Please do not chip at ice. If frost has built up across the back wall, that pattern is itself a clue to the defrost system, and the technician wants to see it as it is.
Does a heavy wooden panel cause problems on a column?
It can, gradually. Custom panels add weight, and hinges drifting out of adjustment leave the door resting a hair open, which strains the cooling system and invites frost. Tell us about any sag, or a door needing a push to latch.
Column died late on a Sunday: whom do I phone?
Dial (310) 706-2347; the line is open at any hour. Since house calls happen 8 AM–6 PM, Monday through Sunday, an evening request takes the next open slot. All channels appear on our contact page.

Thermador tower, Sub-Zero tower, or both?

Ring us with the brand, the model and what is wrong. One trip, one $89, a quote before any work.

$89 buys the visit, never a per-unit tally; approve the fix and those $89 are deducted from its invoice.